Prosoft-technology 5201-MNET-101S Instrukcja Użytkownika Pobierz pdf (Strona 124)

Reference IEC-101 Slave ♦ ProLinx Communication Gateway

Protocol Manual IEC 60870-5-101 v3 Slave (Firmware version 3.xx)

Page 124 of 159 ProSoft Technology, Inc.

August 6, 2010

Each event contains the following data structure:

Start Byte End Byte Data Field(s) Description

0 1 DB Index This is the index for the point in the gateway’s

database. This corresponds to the order of point

definition for the gateway data types. This is not the

point address for the event.

2 2 ASDU This is the ASDU data type for the event message.

 1=single point,

 3=double-point,

 5=step,

 9=normalized,

 11=scaled,

 13=short-float

 15=integrated total.

3 3 Qualifier This is the qualifier code for the event message. Refer

to the IEC protocol specification for a full listing of valid

qualifier codes for each ASDU type.

4 5 Year This field contains the four-digit year for the event.

6 6 Month This field contains the month value for the event. Valid

entry for this field is in the range of 1 to 12.

7 7 Day This field contains the day value for the event. Valid

entry for this field is in the range of 1 to 31.

8 8 Hour This field contains the hour value for the event. Valid

entry for this field is in the range of 0 to 23 (bits 0 to 4).

Bit 7 of the byte can be used to set the summer time

flag (0=standard, 1=summer time)

9 9 Minute This field contains the minute value for the event. Valid

entry for this field is in the range of 0 to 59 (bits 0 to 5).

Bit 7 of the byte can be used to set the invalid bit for

the time (0=valid, 1=invalid).

10 11 Seconds &

Milliseconds

This field contains the seconds and milliseconds value

for the event. Valid entry for this field is in the range of

0 to 59,999.

12 15 Data These bytes contain the data for the event. For single-

and double-point, step events, the first byte is used.

For measured value events, the first two bytes are

used. For integrated total and short-float events, all four

bytes are used.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 158 159

Komentarze do niniejszej Instrukcji

Brak uwag

Prosoft-technology 5201-MNET-101S Instrukcja Użytkownika Strona 124

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Przekaźnik Prosoft-technology 5201-MNET-101S