ProSoft Technology inRA-x ILX34-AENWG Instrukcja Konfiguracji Pobierz pdf (Strona 23)

Procedures ILX34-AENWG ♦ POINT I/O Platform

Setup Guide Wireless Point I/O Adapter

ProSoft Technology, Inc. Page 23 of 79

July 31, 2009

3.2.7 Configure the ILX34-AENWG for Wireless Access

You can configure the ILX34-AENWG's wireless settings from the MODULE

PROPERTIES dialog box in RSLogix 5000, or from the ILX34-AENWG's web page.

The first time you configure the adaptor, you should use the adapter's web page.

Important: The wireless settings for the ILX34-AENWG must be compatible with the Industrial

Hotspot radio (page 18) connected to the Ethernet bridge (for example, a 1756-ENBT module in a

ControlLogix rack).

Important: All radios on the network must use the same settings, otherwise they will be unable to

communicate with each other.

Configuring Wireless Settings from the Adapter's Web Page

You can monitor and update ILX34-AENWG configuration from the adapter's

built-in web server.

Open your web browser (for example, Microsoft Internet Explorer or Firefox), and

connect to the adapter's temporary network address.

http://192.168.1.xxx

(where xxx is the value you entered in the rotary switches on the front of the

adapter.

Important: Your PC must be on the same TCP/IP subnet as the adaptor to view these pages.

Important: You must prefix the numeric IP address with "http://", otherwise the web browser

may not be able to interpret the address.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 78 79

Brak uwag

ProSoft Technology inRA-x ILX34-AENWG Instrukcja Konfiguracji Strona 23