
Reference MVI69E-MBS ♦ CompactLogix Platform
User Manual Communication Module
Page 132 of 162 ProSoft Technology, Inc.
January 6, 2014
7.4.1 Event Blocks
Blocks 1000 to 1255: Event Port 1
Blocks 2000 to 2255: Event Port 2
Event Command blocks send Modbus commands directly from the ladder logic to
one of the Master ports. The Event Command is added to the high-priority queue
and interrupts normal polling so that this special command can be sent as soon
as possible.
Note: Overusing Event Commands may substantially slow or totally disrupt normal polling. Use
Event Commands sparingly. Event Commands are meant to be used as one-shot commands
triggered by special circumstances or uncommon events.
Blocks 1000 to 1255 or 2000 to 2255: Request from Processor to Module
Write Block ID: 1000 to 1255 for a Port 1 command or 2000 to 2255 for a Port 2
command. The last 3 digits of the command are used to specify the slave address to
use for the command.
Internal address in the module to be used with the command.
Count parameter that determines the number of digital points or registers to
associate with the command.
Modbus Function Code to be associated with the command.
Modbus address in the slave device to be used in the command.
Where n = 60, 120, or 240 depending on the Block Transfer Size parameter.
Blocks 1000 to 1255 or 2000 to 2255: Response from Module to Processor
Read Block ID: 1000 to 1255 or 2000 to 2255 requested by the processor.
Write Block ID: To be used by the processor in its next Write block
Result of the event request. 1 = the command was placed in the command queue; 0
= no room was found in the command queue.
Number of commands in the command queue for the specified port.
Komentarze do niniejszej Instrukcji