Prosoft-technology PLX81-EIP-61850 Instrukcja Użytkownika Pobierz pdf (Strona 13)

PLX8x-EIP-61850 ♦ Communication Gateway Start Here

Server to

IEC 61850 Client User Manual

ProSoft Technology, Inc. Page 13 of 167

July 2, 2015

To mount the ProLinx IEC 61850 Series gateway module on a DIN-rail, follow

these steps.

1 Position the gateway module on the DIN-rail B at a slight angle.

2 Hook the lip on the rear of the adapter onto the top of the DIN-rail, and rotate

the adapter onto the rail.

3 Press the adapter down onto the DIN-rail until flush. The locking tab snaps

into position and lock the module to the DIN-rail.

4 If the adapter does not lock in place, use a screwdriver or similar device to

move the locking tab down while pressing the adapter flush onto the DIN-rail

and release the locking tab to lock the adapter in place. If necessary, push up

on the locking tab to lock.

1.6 Connecting Power to the Unit

WARNING: Be sure not to reverse polarity when applying power to the gateway.

This causes permanent damage to the gateway’s internal power distribution

circuits.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 166 167

Brak uwag

Prosoft-technology PLX81-EIP-61850 Instrukcja Użytkownika Strona 13