Prosoft-technology PLX81-EIP-61850 Instrukcja Użytkownika Pobierz pdf (Strona 12)

Start Here PLX8x-EIP-61850 ♦ Communication Gateway

User Manual Server to

IEC 61850 Client

Page 12 of 167 ProSoft Technology, Inc.

July 2, 2015

1.4.2 PLX82-EIP-61850

For security reasons, the Mode 1 and Mode 2 jumpers are not readily accessible.

Under normal conditions, these two jumpers will not be needed. The following

diagram illustrates the available Setup Jumper setting.

Setup Jumper:

This mode is jumpered by default. It must be jumpered when performing a

firmware upgrade or when downloading a configuration file to the module.

For normal operation, this jumper should be hung on only one pin (not jumpered).

Removing the jumper allows for better communications between the IEC and

EtherNet/IP driver.

1.5 Mounting the Gateway on a DIN-rail

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 166 167

Brak uwag

Prosoft-technology PLX81-EIP-61850 Instrukcja Użytkownika Strona 12