Prosoft-technology MVI71-DFNT Instrukcja Użytkownika Pobierz pdf (Strona 46)

Diagnostics and Troubleshooting MVI71-DFNT ♦ PLC 5

User Manual EtherNet/IP Client/Server Communication Module

Page 46 of 175 ProSoft Technology, Inc.

February 3, 2011

4.1 LED Status Indicators

The LEDs indicate the module’s operating status as follows:

LED Color Status Indication

CFG Green On Data is being transferred between the module and a remote

terminal using the Configuration/Debug port.

Off No data is being transferred on the Configuration/Debug

port.

P1 Green On Data is being transferred between the module and the

processors Channel 0 port.

Off No data is being transferred on this port

P2 Green On Data is being transferred on this port and the remote device

connected to the port

Off No data is being transferred on this port

APP Amber Off The MVI71-DFNT is working normally.

On The MVI71-DFNT module program has recognized an error.

BP ACT Amber On The LED is on when the module is performing a write

operation on the backplane.

Off The LED is off when the module is performing a read

operation on the backplane. Under normal operation, the

LED should blink rapidly on and off.

OK Red/

Green

Off The card is not receiving any power and is not securely

plugged into the rack.

Green The module is operating normally.

Red

The program has detected an error or is being configured. If

the LED remains red for over 10 seconds, the program has

probably halted. Remove the card from the rack and re-

insert the card to restart the module’s program.

BAT Red Off The battery voltage is OK and functioning.

On The battery voltage is low or battery is not present. Allow

battery to charge by keeping module plugged into rack for

24 hours. If BAT LED still does not go off, contact ProSoft

Technology, as this is not a user serviceable item.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 174 175

Brak uwag

Prosoft-technology MVI71-DFNT Instrukcja Użytkownika Strona 46