Prosoft-technology AN-X-AMX Instrukcja Użytkownika Strona 11
- Strona / 50
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
AN-X-AMXCAPT Page 7
IMPORTANT!
Use this temporary IP address only for initial setup of AN-X. AN-X will
not function for its intended purpose at the temporary IP address.
If you are using multiple AN-X modules, configure one at a time, especially if there is no
DHCP server on the network, since they will all revert to the same temporary IP address
when they fail to find a DHCP server.
IMPORTANT!
If you are connecting AN-X to an existing Ethernet network, consult the
network administrator to obtain information about how you should
configure AN-X and to obtain a static IP address for AN-X.
IMPORTANT!
The AN-X must be on the local Ethernet when you set its IP address.
You configure the Ethernet properties using the Windows utility AnxInit supplied with
AN-X.
Use the Configuration/AN-X IP Settings command to start the AN-X IP configuration
wizard, which takes you step by step through the IP configuration process.
Step 1
In step 1, you identify the AN-X you are configuring.
1. Select the Ethernet adapter that’s connected to the AN-X. In most cases there will be
just one Ethernet adapter in the computer. The AN-X must be on the same subnet as the
computer.
2. Enter the MAC address of the AN-X you are configuring. This is printed on the AN-X
label. It consists of six pairs of hexadecimal digits, separated by hyphens. In the
example above, it’s 00-0c-1a-00-00-09.
- User Manual 1
- AN-X-AMXCAPT Module Overview 6
- Package Contents 7
- Other Requirements 7
- Modes of Operation 7
- Installation 8
- Ethernet Cabling 9
- Software Installation 9
- Basic Configuration 10
- AN-X-AMXCAPT Page 7 11
- AN-X-AMXCAPT Page 9 13
- Setting the AN-X IP Address 15
- Capturing Network Frames 15
- Selecting Frames of Interest 17
- Option Files 19
- Timestamps 20
- AN-X-AMXCAPT Page 17 21
- Frame Data 23
- Equations 24
- AN-X-AMXCAPT Page 21 25
- Constants 27
- Passing In Parameters 28
- Operators 28
- Sample Option Files 29
- Captured Data Format 30
- AN-X-AMXCAPT Page 27 31
- Using AnxInit 32
- AN-X-AMXCAPT Page 29 33
- Selecting an AN-X 34
- Set AN-X IP Configuration 35
- Restart an AN-X 36
- AN-X Info 36
- Read Kernel Parameters 37
- Run Config Mode 37
- Update AN-X Flash 37
- Update Firmware 38
- AN-X-AMXCAPT Page 35 39
- Update Firmware Command 41
- Patch Firmware 42
- AN-X-AMXCAPT Page 39 43
- Using the Web Interface 44
- Troubleshooting 45
- NET LED – Network Status 46
- Updating the Firmware 47
- Specifications 48
- Support 49
- Warranty 50
Powiązane produkty i podręczniki dla Przekaźnik Prosoft-technology AN-X-AMX
(55 strony)Ibico Calculators user manuals
Starting on I
Komentarze do niniejszej Instrukcji