Prosoft-technology MVI56E-MNETCR Instrukcja Użytkownika Pobierz pdf (Strona 81)

MVI56E-MNETCR ♦ ControlLogix Platform Diagnostics and Troubleshooting

Modbus TCP/IP Multi Client Enhanced Communications Module for Remote Chassis User Manual

ProSoft Technology, Inc. Page 81 of 159

June 14, 2011

4.1.2 Ethernet LED Indicators

The Ethernet LEDs indicate the module's Ethernet port status as follows:

LED State Description

Data OFF Ethernet connected at 10Mbps duplex speed

AMBER Solid Ethernet connected at 100Mbps duplex speed

Link OFF No physical network connection is detected. No Ethernet

communication is possible. Check wiring and cables.

GREEN Solid

or Blinking

Physical network connection detected. This LED must be ON solid

for Ethernet communication to be possible.

4.1.3 Non-Scrolling LED Status Indicators

The non-scrolling LEDs indicate the module’s operating status as follows:

LED Label Color Status Indication

APP Red or

Green

OFF The module is not receiving adequate power or is not securely

plugged into the rack. May also be OFF during configuration

download.

GREEN The MVI56E-MNETCR is working normally.

RED The most common cause is that the module has detected a

communication error during operation of an application port.

The following conditions may also cause a RED LED:

 The firmware is initializing during startup

 The firmware detects an on-board hardware problem

during startup

 Failure of application port hardware during startup

 The module is shutting down

 The module is rebooting due to a ColdBoot or WarmBoot

request from the ladder logic or Debug Menu

OK Red or

Green

OFF The module is not receiving adequate power or is not securely

plugged into the rack.

GREEN The module is operating normally.

RED The module has detected an internal error or is being

initialized. If the LED remains RED for over 10 seconds, the

module is not working. Remove it from the rack and re-insert it

to restart its internal program.

ERR Not Used

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 158 159

Komentarze do niniejszej Instrukcji

Brak uwag

Prosoft-technology MVI56E-MNETCR Instrukcja Użytkownika Strona 81

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Przekaźnik Prosoft-technology MVI56E-MNETCR